Leader ElastaGraphEmission Reduction Gaskets
image of Leader ElastaGraphimage of Leader ElastaGraph

Leader ElastaGraph SG Pipe Flange Gaskets

Description

Elastagraph™ gaskets are produced by infusing seamless layers of flexible graphite at varying densities and thicknessess over a corrugated metallic core. Elastagraph™ utilizes a unique corrugated pattern which increases the depth of the groove and the pitch at the peak of the corrugation. This greatly improves the gaskets sealability over traditional corrugated designs.

Downloads

Product Data Sheet

Application

Elastagraph SG is designed specifically to solve fugitive emission and compliance problems. It also has excellent performance in bolted joints that experience thermal cycling or limited initial bolt load. Elastagraph™ is the most economical way of meeting low emission requirements.

Advtantages

Excellent sealing against vaporous and media like gases and thermal (hot) oil.

Chemical Compatiblity

Elastagraph SG flange gaskets can be used in a wide variety of media, i.e. a pH range varying from 0-14. Application / compatibility guide is available on request. Pressure from vacuum to ASME class 600lbs and DIN/EN class PN40. Temperature from -400 ºF to 850 ºF (steam 1200 ºF).

Delivery Options

All non-standard pipe flange configurations with and without bolt holes according customer specifications or Edrawing.

Temperature

Elastagraph SG flange gaskets can be used in a wide variety of media, i.e. a pH range varying from 0-14. Application / compatibility guide is available on request. Pressure from vacuum to ASME class 600lbs and DIN/EN class PN40. Temperature from -400 ºF to 850 ºF (steam 1200 ºF).

Sealing Characteristics

  • Low porosity
  • Very low emmission
  • Perfect sealability on low bolt load
  • High recovery
  • Suitable for irregular flanges and surfaces
  • To be used for elevated and cryogenic temperatures
  • Improved handle ability
  • Minimum sticking to flange surfaces
Technical Data
max Temperature [°F]850
max Pressure [psi]DIN PN40 & ASME B16.5 600 Class
M-Value3
Y- Value [psi]5000
Gasket required flange roughness [Ra micron]3,2-6,3
Gasket required flange roughness [RMS]125-250
max Seating stress [Qsmax bei RT EN13555] [n/mm2]225
Advice Seating stress at assembly [psi]8000
ROTT [Gb]32
ROTT [a]0.718
ROTT [Gs"]0.001
  • Logo LinkedIn

Welcome to the Leader Gasket website.

Please select your preference:

Leader Gasket North AmericaLeader Gasket Europe