image of Chemicalsimage of Chemicals
Chemicals

Leader ElastaGraph

Description

Elastagraph™ gaskets are produced by infusing seamless layers of flexible graphite at varying densities and thicknessess over a corrugated metallic core. Elastagraph™ utilizes a unique corrugated pattern which increases the depth of the groove and the pitch at the peak of the corrugation. This greatly improves the gaskets sealability over traditional corrugated designs. Available also for Heat Exchanger applications.

Downloads

Product Data Sheet

Application

Elastagraph™ is designed specifically to solve fugitive emission and compliance problems. It also has excellent performance in bolted joints that experience thermal cycling or limited initial bolt load. Elastagraph™ is the most economical way of meeting low emission requirements.

Advtantages

Excellent sealing against vaporeus and media like gases and thermal (hot) oil

Chemical Compatiblity

Elastagraph™ flange gaskets can be used in a wide variety of media, i.e. a pH range varying from 0-14. Application / compatibility guide is available on request. Pressure from vacuum to ASME class 600lbs and DIN/EN class PN40. Temperature from -400 ºF to 850 ºF (steam 1200 ºF).

Delivery Options

Standard gaskets are available in accordance with ASME B16.21 (1/2” – 24”) , EN12560-1 as well as EN1514-1 (DN10- DN600). Standard thickness is 1,6 mm (1/16”)en 3,2 mm(1/8”).Non-standard, or special gaskets, can be manufactured according to patricular customer drawings, or by given sizes. Please note that tooling may be required.diameter of 4000 mm. We have a large stock in SS316L. Other materials are also available.

Temperature

Elastagraph™ flange gaskets can be used in a wide variety of media, i.e. a pH range varying from 0-14. Application / compatibility guide is available on request. Pressure from vacuum to ASME class 600lbs and DIN/EN class PN40. Temperature from -400 ºF to 850 ºF (steam 1200 ºF).

Approvals

  • TA-Luft

Certificates

  • TA-Luft
Technical Data
Related Products

Leader ElastaGraph SG Pipe Flange Gaskets

Leader ElastaGraph SG Pipe Flange Gaskets

Elastagraph SG non standerd pipe and equipment gaskets - produced by infusingseamless layers of flexible graphite at varying densities and thicknessess over a corrugated metallic core. Designed to solve fugitive emission and comp...

LeaderKAM Kammprofile Gasket Style KB

LeaderKAM Kammprofile Gasket Style KB

Convex grooved core without outer guide ring. Consist of a metallic convex grooved core with layers(graphite, PTFE, phlogopite (mica) or alternative). ...

LeaderKAM Kammprofile Gasket Style KB9

LeaderKAM Kammprofile Gasket Style KB9

Convex grooved core with fixed outer guide ring. Consist of a metallic convex grooved core, fixed outer guide ring and with layers(graphite, PTFE, phlogopite (mica) or alternative)....

LeaderKAM Kammprofile Gasket Style KV

LeaderKAM Kammprofile Gasket Style KV

Parallel grooved core without outer guide ring. Consist of a metallic parallel grooved core with layers(graphite, PTFE, phlogopite (mica) or alternative)....

LeaderKAM Kammprofile Gasket Style KV9

LeaderKAM Kammprofile Gasket Style KV9

Parallel grooved core with fixed outer guide ring. Consist of a metallic parallel grooved core, fixed outer guide ring and with layers(graphite, PTFE, phlogopite (mica) or alternative)....

LeaderKAM Kammprofile Gasket Style KV9L

LeaderKAM Kammprofile Gasket Style KV9L

Parallel grooved core with fixed outer guide ring. Consist of a metallic parallel grooved core, fixed outer guide ring and with layers(graphite, PTFE, phlogopite (mica) or alternative)....

Leader Spiral Wound Gasket Type SRI

Leader Spiral Wound Gasket Type SRI

The sealing element with inner- and outer guide ring. The “SRI” SWG’s are manufactured with an inner, outer guide ring, sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

Leader Spiral Wound Gasket Type SI

Leader Spiral Wound Gasket Type SI

The sealing element with inner ring. The “SI” SWG’s are manufactured with an inner ring, sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

Leader Spiral Wound Gasket Type SR

Leader Spiral Wound Gasket Type SR

The sealing element with outer guide ring. The “SR” SWG’s are manufactured with an outer guide ring, sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

Leader Spiral Wound Gasket Type S

Leader Spiral Wound Gasket Type S

The sealing element - no inner- and outer guide ring. The “S” SWG´s are manufactured in sealing element - winding material (SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

  • Logo LinkedIn
X

Hi,
You are visiting the EU website but you are from the US.

Would you like to go to the US version?

US Version