Food & Pharmaceuticals
image of Food & Pharmaceuticalsimage of Food & Pharmaceuticals

Leader Clipperlon 2120

Description

Modified PTFE gasket material containing biaxial orientated chains to obtain a tight seal for demanding applications. Clipperlon 2120 is a very dense material with low compressibility, high recovery and low creep properties. Off-white in color and produced with Modified PTFE and barium sulfate filler. Clipperlon 2120 particularly suitable for use with hydrofluoric acid and chlorine applications and a wide variety of different media across the whole pH-range. Due to the high density this material is highly recommended for applications with monomers to avoid the ‘popcorning’ effect. This effect will be result when the monomer enters the micro-voids of the PTFE. Available also for Heat Exchanger applications.

Downloads

Product Data Sheet

Application

Particularly suitable for use with hydrofluoric acid and a wide variety of different media across the whole pH-range. Applications can be found in chemical, pharmaceutical, food and beverage and general industry. Due to the high density this material is highly recommended for applications with monomers to avoid the ‘popcorning’ effect. This effect will be result when the monomer enters the micro-voids of the PTFE.

Advtantages

Clipperlon 2120 particularly suitable for use with hydrofluoric acid and chlorine applications and a wide variety of different media across the whole pH-range. Due to the high density this material is highly recommended for applications with monomers to avoid the ‘popcorning’ effect. This effect will be result when the monomer enters the micro-voids of the PTFE.

Chemical Compatiblity

Particularly suitable for use with hydrofluoric acid, but not pure hydrogen fluoride. Best for use with strong alkalis, solvents, fuels, water, steam and chlorine. Other applications include solvents, fuels, water, oil, chlorine and caustics. A chemical resistance listis available upon request.Pressure up to 1200 psi. Temperature from -450 ºF up to 500 ºF.

Delivery Options

Flange gaskets and sheets are available in thickness of 1/32",1/16", 1/8", 0,5mm, 1mm, 1,5mm, 2mm and 3mm. Other thicknesses available on request. Standard gaskets can be supplied in accordance with ASME B16.21, EN12560-1 as well as EN1514-1. Non-standard or special gaskets can be manufactured according to customer drawings, or by given sizes or Edrawing.

Temperature

Particularly suitable for use with hydrofluoric acid, but not pure hydrogen fluoride. Best for use with strong alkalis, solvents, fuels, water, steam and chlorine. Other applications include solvents, fuels, water, oil, chlorine and caustics. A chemical resistance list is available upon request.Pressure up to 1200 psi. Temperature from -450 ºF up to 500 ºF.

Approvals

  • FDA 21 CFR 177.1550
  • TA-Luft
  • EC1935 (10/2011)

Certificates

  • FDA 21 CFR 177.1550
  • TA-Luft
  • EC1935 (10/2011)

Sealing Characteristics

  • significant reduced creep (non-cold flow)
  • low leak rate
  • good electrical insulation properties
  • outstanding chemical resistance
  • Non-ageing
  • excellent sealability
Technical Data
  • Logo LinkedIn

Welcome to the Leader Gasket website.

Please select your preference:

Leader Gasket North AmericaLeader Gasket Europe