image of Leader Clipperlonimage of Leader Clipperlon
Leader ClipperlonModified PTFE Gaskets

Leader Clipperlon 2120

Description

Modified PTFE gasket material containing biaxial orientated chains to obtain a tight seal for demanding applications. Clipperlon 2120 is a very dense material with low compressibility, high recovery and low creep properties. Off-white in color and produced with Modified PTFE and barium sulfate filler. Clipperlon 2120 particularly suitable for use with hydrofluoric acid and chlorine applications and a wide variety of different media across the whole pH-range. Due to the high density this material is highly recommended for applications with monomers to avoid the ‘popcorning’ effect. This effect will be result when the monomer enters the micro-voids of the PTFE

Available also for Heat Exchanger applications.

Downloads

Product Data Sheet

Application

Particularly suitable for use with hydrofluoric acid and a wide variety of different media across the whole pH-range. Applications can be found in chemical, pharmaceutical, food and beverage and general industry. Due to the high density this material is highly recommended for applications with monomers to avoid the ‘popcorning’ effect. This effect will be result when the monomer enters the micro-voids of the PTFE.

Advtantages

Clipperlon 2120 particularly suitable for use with hydrofluoric acid and chlorine applications and a wide variety of different media across the whole pH-range. Due to the high density this material is highly recommended for applications with monomers to avoid the ‘popcorning’ effect. This effect will be result when the monomer enters the micro-voids of the PTFE.

Chemical Compatiblity

Patricularly suitable for use with hydrofluoric acid, but not pure hydrogen fluoride. Best for use with string alkalis, solvents, fuels, water, steam and chlorine. Other applications include solvents, fuels, water, oil, chlorine and caustics. A chemical resistance listis available upon request.Pressure up to 1200 psiTemperature from -450 ºF up to 500 ºF

Delivery Options

Flange gaskets and sheets are available in thickness of 1/32",1/16", 1/8", 0,5mm, 1mm, 1,5mm, 2mm and 3mm. Other thicknesses available on request.. Standard gaskets can be supplied in accordance with ASME B16.21, EN12560-1 as well as EN1514-1. Non-standard or special gaskets can be manufactured according to customer drawings, or by given sizes or Edrawing.

Temperature

Patricularly suitable for use with hydrofluoric acid, but not pure hydrogen fluoride. Best for use with string alkalis, solvents, fuels, water, steam and chlorine. Other applications include solvents, fuels, water, oil, chlorine and caustics. A chemical resistance list is vailable upon request.Pressure up to 1200 psiTemperature from -450 ºF up to 500 ºF

Approvals

  • FDA 21 CFR 177.1550
  • TA-Luft
  • EC1935 (10/2011)

Certificates

  • FDA 21 CFR 177.1550
  • Chlorine Institute service class I & IV of Pamphlet 95, Edition 5
  • TA-Luft
  • EC1935 (10/2011)

Sealing Characteristics

  • non ageing
  • significant reduced creep (non-cold flow)
  • low leak rate
  • good electrical insulation properties
  • outstanding chemical resistance
Technical Data
max Temperature [°F]500
max Temperature [°C]260
max Pressure [psi](85) 1200
density [g/cm3]2.8
Leakage Specific Leak Rate [DIN 28090-2] [mg/(s*m)]0.01
Minimum initial stress [DIN E 2505 part 2] [N/mm2]20
Maximum initial stress [DIN E 2505 part 2] [N/mm2]150
M-Value3.5
Y- Value [psi]2450
ASTM F36 Recovery [% min]40
Gasket required flange roughness [Ra micron]3,2-6,3
Gasket required flange roughness [RMS]125-250
max Seating stress [Qsmax bei RT EN13555] [n/mm2]100
Tensile Strength (quer) DIN 52910 [N/mm²]>= (13) 1885
Advice Seating stress at assembly [psi](35) 5000
ROTT [Gb]0.318
ROTT [a]0.318
ROTT [Gs"]0.318
ASTM F36 Recovery [% min]40
ASTM F37 Sealability [ml/min] Sg=1000 psi=300.22
ASTM F38 Creep Relaxation [%]12
ASTM F152 Average Tensile [psi]2000
  • Logo LinkedIn
X

Hi,
You are visiting the EU website but you are from the US.

Would you like to go to the US version?

US Version