image of Leader Clipperlonimage of Leader Clipperlon
Leader ClipperlonModified PTFE Gaskets

Leader Clipperlon 2110

Description

Modified PTFE gasket material manufactured with bi- axial orientated chains to obtain a tight seal for demanding applications. This material has a rather high compressibility characteristics and low minimum seating stress value. Therefore this material is highly recommended for low torque applications, plastic pipe systems and flanges, as well as glass and ceramic lined equipment. Blue in color and produced with Modified PTFE and hollow glass micro spheres as a filler.

Available also for Heat Exchanger applications.

Downloads

Product Data Sheet

Application

Specially designed for use in low bolt loaded constructions for sealing applications across whole pH-range: Therefore extremely suitable for glass, ceramics, and plastic lined or distorted flanges and even flanges with light surface irregularities.

Advtantages

Clipperlon 2110 is a general all purpose PTFE sealing material for all flange connections, also for flanges with easily damaged sealing surfaces (including glass lining) and it also has good electrical insulating properties for where electrical isolation is required.

Chemical Compatiblity

Particularly for use with strong acids (except hydrofluoric acid) and alkalis. Other applications include solvents, fuels, water and oil. A chemical resistance list is available upon request. Pressure up to 800 psi Temperature from -410 °F up to 500 °F

Delivery Options

Flange gaskets and sheets are available in thickness of 1/32",1/16", 1/8", 0,5mm, 1mm, 1,5mm, 2mm and 3mm. Other thicknesses available on request.. Standard gaskets can be supplied in accordance with ASME B16.21, EN12560-1 as well as EN1514-1. Non-standard or special gaskets can be manufactured according to customer drawings, or by given sizes or Edrawing.

Temperature

Particularly for use with strong acids (except hydrofluoric acid) and alkalis. Other applications include solvents, fuels, water and oil. A chemical resistance list is available upon request. Pressure up to 800 psi Temperature from -410 °F up to 500 °F

Approvals

  • FDA 21 CFR 177.1550
  • TA-Luft
  • EC1935 (10/2011)

Certificates

  • TA-Luft
  • EC1935 (10/2011)
  • FDA 21 CFR 177.1550

Sealing Characteristics

  • non ageing
  • significant reduced creep
  • low leak rate
  • good electrical insulation properties
  • outstanding chemical resistance
  • excellent seal ability for low torque applications
Technical Data
max Temperature [°F]500
max Temperature [°C]260
max Pressure [psi](55) 800
density [g/cm3]1.7
Leakage Specific Leak Rate [DIN 28090-2] [mg/(s*m)]0.02
Minimum initial stress [DIN E 2505 part 2] [N/mm2]10
Maximum initial stress [DIN E 2505 part 2] [N/mm2]150
M-Value3
Y- Value [psi]1600
ASTM F36 Recovery [% min]30
Gasket required flange roughness [Ra micron]3,2-6,3
Gasket required flange roughness [RMS]125-250
max Seating stress [Qsmax bei RT EN13555] [n/mm2]100
Tensile Strength (quer) DIN 52910 [N/mm²]>= (13) 1885
Advice Seating stress at assembly [psi](35) 5000
ROTT [Gb]0.3
ROTT [a]0.3
ROTT [Gs"]0.3
ASTM F36 Recovery [% min]30
ASTM F37 Sealability [ml/min] Sg=1000 psi=300.23
ASTM F38 Creep Relaxation [%]27
ASTM F152 Average Tensile [psi]2000
  • Logo LinkedIn
X

Hi,
You are visiting the EU website but you are from the US.

Would you like to go to the US version?

US Version