image of Primary industriesimage of Primary industries
Primary industries

Leader Clipperlon 2120

Description

Modified PTFE gasket material containing biaxial orientated chains to obtain a tight seal for demanding applications. Clipperlon 2120 is a very dense material with low compressibility, high recovery and low creep properties. Off-white in color and produced with Modified PTFE and barium sulfate filler. Clipperlon 2120 particularly suitable for use with hydrofluoric acid and chlorine applications and a wide variety of different media across the whole pH-range. Due to the high density this material is highly recommended for applications with monomers to avoid the ‘popcorning’ effect. This effect will be result when the monomer enters the micro-voids of the PTFE

Available also for Heat Exchanger applications.

Downloads

Product Data Sheet

Application

Particularly suitable for use with hydrofluoric acid and a wide variety of different media across the whole pH-range. Applications can be found in chemical, pharmaceutical, food and beverage and general industry. Due to the high density this material is highly recommended for applications with monomers to avoid the ‘popcorning’ effect. This effect will be result when the monomer enters the micro-voids of the PTFE.

Advtantages

Clipperlon 2120 particularly suitable for use with hydrofluoric acid and chlorine applications and a wide variety of different media across the whole pH-range. Due to the high density this material is highly recommended for applications with monomers to avoid the ‘popcorning’ effect. This effect will be result when the monomer enters the micro-voids of the PTFE.

Chemical Compatiblity

Patricularly suitable for use with hydrofluoric acid, but not pure hydrogen fluoride. Best for use with string alkalis, solvents, fuels, water, steam and chlorine. Other applications include solvents, fuels, water, oil, chlorine and caustics. A chemical resistance listis available upon request.Pressure up to 1200 psiTemperature from -450 ºF up to 500 ºF

Delivery Options

Flange gaskets and sheets are available in thickness of 1/32",1/16", 1/8", 0,5mm, 1mm, 1,5mm, 2mm and 3mm. Other thicknesses available on request.. Standard gaskets can be supplied in accordance with ASME B16.21, EN12560-1 as well as EN1514-1. Non-standard or special gaskets can be manufactured according to customer drawings, or by given sizes or Edrawing.

Temperature

Patricularly suitable for use with hydrofluoric acid, but not pure hydrogen fluoride. Best for use with string alkalis, solvents, fuels, water, steam and chlorine. Other applications include solvents, fuels, water, oil, chlorine and caustics. A chemical resistance list is vailable upon request.Pressure up to 1200 psiTemperature from -450 ºF up to 500 ºF

Approvals

  • FDA 21 CFR 177.1550
  • TA-Luft
  • EC1935 (10/2011)

Certificates

  • FDA 21 CFR 177.1550
  • Chlorine Institute service class I & IV of Pamphlet 95, Edition 5
  • TA-Luft
  • EC1935 (10/2011)

Sealing Characteristics

  • non ageing
  • significant reduced creep (non-cold flow)
  • low leak rate
  • good electrical insulation properties
  • outstanding chemical resistance
Technical Data
Related Products

Leader Clipperlon 2100

Leader Clipperlon 2100

Modified PTFE sheet manufactured with biaxial oriented longer molecule chains specially designed for high demanding applications. Due to this specific material structure and special manufacturing process a low creep properties are...

Leader Clipperlon 2110

Leader Clipperlon 2110

Modified PTFE(bi-axial) sheet, blue in color produced with Modified PTFE and hollow glass micro spheres as a filler. Suitable for low torque applications, plastic pipe systems and flanges, as well as glass and ceramic lined equip...

Leader Clipperlon 2130

Leader Clipperlon 2130

Homogeneous expanded PTFE sheet, which uses product geometry rather than fillers or binders to address concerns associated with traditional PTFE material...

Leader ElastaGraph

Leader ElastaGraph

Elastagraph™ standard pipe gaskets - produced by infusing seamless layers of flexible graphite at varying densities and thicknessess over a corrugated metallic core. Designed to solve fugitive emission and compliance problems....

Leader ElastaGraph SG Pipe Flange Gaskets

Leader ElastaGraph SG Pipe Flange Gaskets

Elastagraph SG non standerd pipe and equipment gaskets - produced by infusingseamless layers of flexible graphite at varying densities and thicknessess over a corrugated metallic core. Designed to solve fugitive emission and comp...

LeaderKAM Kammprofile Gasket Style KB

LeaderKAM Kammprofile Gasket Style KB

Convex grooved core without outer guide ring. Consist of a metallic convex grooved core with layers(graphite, PTFE, phlogopite (mica) or alternative). ...

LeaderKAM Kammprofile Gasket Style KB9

LeaderKAM Kammprofile Gasket Style KB9

Convex grooved core with fixed outer guide ring. Consist of a metallic convex grooved core, fixed outer guide ring and with layers(graphite, PTFE, phlogopite (mica) or alternative)....

LeaderKAM Kammprofile Gasket Style KV

LeaderKAM Kammprofile Gasket Style KV

Parallel grooved core without outer guide ring. Consist of a metallic parallel grooved core with layers(graphite, PTFE, phlogopite (mica) or alternative)....

LeaderKAM Kammprofile Gasket Style KV9

LeaderKAM Kammprofile Gasket Style KV9

Parallel grooved core with fixed outer guide ring. Consist of a metallic parallel grooved core, fixed outer guide ring and with layers(graphite, PTFE, phlogopite (mica) or alternative)....

LeaderKAM Kammprofile Gasket Style KV9L

LeaderKAM Kammprofile Gasket Style KV9L

Parallel grooved core with fixed outer guide ring. Consist of a metallic parallel grooved core, fixed outer guide ring and with layers(graphite, PTFE, phlogopite (mica) or alternative)....

Leader Spiral Wound Gasket Type SRI

Leader Spiral Wound Gasket Type SRI

The sealing element with inner- and outer guide ring. The “SRI” SWG’s are manufactured with an inner, outer guide ring, sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

Leader Spiral Wound Gasket Type SI

Leader Spiral Wound Gasket Type SI

The sealing element with inner ring. The “SI” SWG’s are manufactured with an inner ring, sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

Leader Spiral Wound Gasket Type SR

Leader Spiral Wound Gasket Type SR

The sealing element with outer guide ring. The “SR” SWG’s are manufactured with an outer guide ring, sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

Leader Spiral Wound Gasket Type S

Leader Spiral Wound Gasket Type S

The sealing element - no inner- and outer guide ring. The “S” SWG´s are manufactured in sealing element - winding material (SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

  • Logo LinkedIn
X

Hi,
You are visiting the EU website but you are from the US.

Would you like to go to the US version?

US Version