- Downloads
- Product Traceability
- Terms of Sale
- Calculation tool
- Chemical Resistance Guide
- Glossary
- Allowable stress
- Allowable stress design
- Anode
- ASME
- Assembly pressure
- Beater addition product
- Belleville washer
- Binder
- Boiler and Pressure Vessel Code
- Bolt
- Brittle
- Cathode
- Centering ring
- Clamping force
- Compressed fiber sheet
- Compressibility
- Compression set
- Controlled swell
- Corrosion cell
- Corrugated metallic gasket
- Creep
- Creep deformation
- Cure
- Double-jacketed gasket
- Ductile
- Eccentric load
- Effective length of a bolt
- Effective radius of nut, or bolt head, or threads
- Effective sealing width
- Elastic interactions
- Elasticity
- Elastomer
- Electrode
- Electrolyte
- Embedment
- Endurance limit
- Envelope gasket
- Extensometer
- External load
- Eyelet
- Failure of the bolt
- Failure of the joint
- Flange
- Flange rotation
- Flat-face flange
- Fluid resistance
- Fugitive emission
- Full-face gasket
- Galling
- Galvanic protection
- Gasket
- Gasket factors
- Gasketed joint
- Gasket load reaction
- Gasket pressure
- Gasket stress
- Grip length
- Hard and soft gasket materials
- Hot creep during service
- Hydrostatic end thrust
- Impact wrench
- Initial preload
- Inside bolt circle (IBC) gasket
- Internal pressure
- Kammprofile gasket
- Leakage rate
- Live loading
- Material velocity
- Mean value
- Nominal diameter
- Nut factor
- Permeability
- Pitch
- Preload
- Preload accuracy
- Prevailing torque
- Proof load
- PT value
- PVRC
- Raised-face flange
- Recovery
- Reinforcement
- Relaxation
- Residual preload
- Residual stress
- Ring-joint flange
- Ring-joint gasket
- Rolled thread
- ROTT
- Scatter
- Sealability
- Shank
- Shear joint
- Slug wrench
- Spherical washer
- Spiral-wound gasket
- Spring constant
- Standard deviation
- Stiffness
- Strain
- Stress area
- Stress corrosion cracking (SCC)
- Stress cracking
- Stress factor
- Stress relaxation
- Stud
- Surface roughness
- Temperature factor
- Tensile strength
- Tension, bolt
- Tension joint
- Tensioner
- Thread form
- Thread length
- Thread run-out
- Threaded fastener
- Tightness class
- Tightness parameter Tp
- Tongue and groove flange
- Torque
- Torque monitor
- Torque multiplier
- Torque wrench
- Transducer
- Turn-of-nut
- Ultimate strength
- Ultrasonic extensometer
- Width across flats
- Work hardening
- Yield strength
- Installation Guidelines
- Profile overview
- Torque Chart
Allowable stress design
A design procedure developed for the AISC by the Research Council on Structural Connections. Purposely underestimates the strengths of bolts and joint materials to introduce safety factors into the design of structural steel joints. Is an alternative to the more recently defined load and resistance factor design procedure.
