GO TO LEADER GASKET EUROPE

Leader ElastaGraph

EMISSION REDUCTION GASKETS
leader elesta graph

LEADER ELASTAGRAPH SG

CONTACT

Ask Leader Gasket

Do you have a question? Feel free to contact us!

info@leadergt.com

DESCRIPTION

Elastagraph™ gaskets are produced by infusing seamless layers of flexible graphite at varying densities and thicknessess over a corrugated metallic core. Elastagraph™ utilizes a unique corrugated pattern which increases the depth of the groove and the pitch at the peak of the corrugation. This greatly improves the gaskets sealability over traditional corrugated designs.

DOWNLOADS

Product Data Sheet

APPLICATION

Elastagraph SG is designed specifically to solve fugitive emission and compliance problems. It also has excellent performance in bolted joints that experience thermal cycling or limited initial bolt load. Elastagraph™ is the most economical way of meeting low emission requirements.

ADVANTAGES

Excellent sealing against vaporous and media like gases and thermal (hot) oil.

CHEMICAL COMPATIBILITY

Elastagraph SG flange gaskets can be used in a wide variety of media, i.e. a pH range varying from 0-14. Application / compatibility guide is available on request. Pressure from vacuum to ASME class 600lbs and DIN/EN class PN40. Temperature from -400 ºF to 850 ºF (steam 1200 ºF).

DELIVERY OPTIONS

All non-standard pipe flange configurations with and without bolt holes according customer specifications or Edrawing.

TEMPERATURE

Elastagraph SG flange gaskets can be used in a wide variety of media, i.e. a pH range varying from 0-14. Application / compatibility guide is available on request. Pressure from vacuum to ASME class 600lbs and DIN/EN class PN40. Temperature from -400 ºF to 850 ºF (steam 1200 ºF).

APPROVALS & CERTIFICATES

  • Firesafe API 6FB
  • DVGW
  • BAM
  • TA-Luft
  • BAM
  • TA-Luft
  • DVGW
  • Firesafe API 6FB

SEALING CHARACTERISTICS

  • Low porosity
  • Very low emmission
  • Perfect sealability on low bolt load
  • High recovery
  • Suitable for irregular flanges and surfaces
  • To be used for elevated and cryogenic temperatures
  • Improved handle ability
  • Minimum sticking to flange surfaces

Blogs

News

TECHNICAL DATA

max Temperature [°F] 850
max Temperature [°C] 550
max Pressure [psi] ASME B16.5 600 Class
M-Value 2
Y- Value [psi] 1500
Gasket required flange roughness [Ra micron] 3,2-6,3
Gasket required flange roughness [RMS] 125-250
max Seating stress [Qsmax bei RT EN13555] [n/mm2] 225
Advice Seating stress at assembly [psi] 8000
ROTT [Gb] 32
ROTT [a] 0.718
ROTT [Gs”] 0.001

Related Products

Produced by facing a corrugated metal with ePTFE. Designed to be used in application where graphite is not compatible or clean process is required....
Elastagraph SG non-standard pipe and equipment gaskets - produced by infusing seamless layers of flexible graphite, over a corrugated metallic core. Designed to solve fugitive emission and compliance problems....
Elastagraph DS gaskets - produced by infusing seamless layers of flexible graphite and ePTFE , over a corrugated metallic core. Then ePTFE is applied to the I.D. portion of the corrugated core with an 1/8” overlap. Designed to sol...
Elastagraph™ standard pipe gaskets - produced by infusing seamless layers of flexible graphite over a corrugated metallic core. Designed to solve fugitive emission and compliance problems....