Leader ClipperlonModified PTFE Gaskets
image of Leader Clipperlonimage of Leader Clipperlon

Clipperlon 2135



Product Data Sheet


Steel and enamel flanges,   Heat exchanger, Plant / Containers, For high surface stress, For highly aggressive media,   For damaged sealing surfaces


The good resistance behaviour of the material leads to increased operating safety, even in changing operating conditions.

Chemical Compatiblity

Particularly for use with aggressive chemicals from pH 0 to 14 (except for molten alkali metals and elemental fluorine gas)

Delivery Options

Flange gaskets and sheets are available in thickness of 1/32",1/16", 1/8", 0,5mm, 1mm, 1,5mm, 2mm and 3mm. Other thicknesses available on request.. Standard gaskets can be supplied in accordance with ASME B16.21, EN12560-1 as well as EN1514-1. Non-standard or special gaskets can be manufactured according to customer drawings, or by given sizes or Edrawing.


Can be used from -240°C to approx. 270°C, depending on the installation and operating conditions


  • EC1935 (10/2011)
  • FDA 21 CFR 177.1550
  • TA-Luft


  • EC1935 (10/2011)
  • TA-Luft
  • FDA 21 CFR 177.1550

Sealing Characteristics

  • non ageing
  • excellent sealability
  • low leak rate
  • good electrical insulation properties
  • outstanding chemical resistance
Technical Data
max Temperature [°C]270
min Temperature [°C]-240
max Pressure [bar]40
density [g/cm3]0.9
Minimum initial stress [DIN E 2505 part 2] [N/mm2]26
Maximum initial stress [DIN E 2505 part 2] [N/mm2]160
Y- Value [psi]2800
ASTM F36 Recovery [% min]>12
Gasket required flange roughness [Ra micron]3,2-6,3
Gasket required flange roughness [RMS]125-250
max Seating stress [Qsmax bei RT EN13555] [n/mm2]160
Relaxation PQR (30 MPA 150°C) [%]0.78
Residual seating stress , [QA=40 MPA,Qmin(L 0,01), mg/(s*m)] bei RT 40 bar [N/mm2]5
  • Logo LinkedIn

Welcome to the Leader Gasket website.

Please select your preference:

Leader Gasket North AmericaLeader Gasket Europe