image of Primary industriesimage of Primary industries
Primary industries

Leader Clipperlon 2110

Description

Modified PTFE gasket material manufactured with bi- axial orientated chains to obtain a tight seal for demanding applications. This material has a rather high compressibility characteristics and low minimum seating stress value. Therefore this material is highly recommended for low torque applications, plastic pipe systems and flanges, as well as glass and ceramic lined equipment. Blue in color and produced with Modified PTFE and hollow glass micro spheres as a filler.

Available also for Heat Exchanger applications.

Downloads

Product Data Sheet

Application

Specially designed for use in low bolt loaded constructions for sealing applications across whole pH-range: Therefore extremely suitable for glass, ceramics, and plastic lined or distorted flanges and even flanges with light surface irregularities.

Advtantages

Clipperlon 2110 is a general all purpose PTFE sealing material for all flange connections, also for flanges with easily damaged sealing surfaces (including glass lining) and it also has good electrical insulating properties for where electrical isolation is required.

Chemical Compatiblity

Particularly for use with strong acids (except hydrofluoric acid) and alkalis. Other applications include solvents, fuels, water and oil. A chemical resistance list is available upon request. Pressure up to 800 psi Temperature from -410 °F up to 500 °F

Delivery Options

Flange gaskets and sheets are available in thickness of 1/32",1/16", 1/8", 0,5mm, 1mm, 1,5mm, 2mm and 3mm. Other thicknesses available on request.. Standard gaskets can be supplied in accordance with ASME B16.21, EN12560-1 as well as EN1514-1. Non-standard or special gaskets can be manufactured according to customer drawings, or by given sizes or Edrawing.

Temperature

Particularly for use with strong acids (except hydrofluoric acid) and alkalis. Other applications include solvents, fuels, water and oil. A chemical resistance list is available upon request. Pressure up to 800 psi Temperature from -410 °F up to 500 °F

Approvals

  • FDA 21 CFR 177.1550
  • TA-Luft
  • EC1935 (10/2011)

Certificates

  • TA-Luft
  • EC1935 (10/2011)
  • FDA 21 CFR 177.1550

Sealing Characteristics

  • non ageing
  • significant reduced creep
  • low leak rate
  • good electrical insulation properties
  • outstanding chemical resistance
  • excellent seal ability for low torque applications
Technical Data
Related Products

Leader Clipperlon 2100

Leader Clipperlon 2100

Modified PTFE sheet manufactured with biaxial oriented longer molecule chains specially designed for high demanding applications. Due to this specific material structure and special manufacturing process a low creep properties are...

Leader Clipperlon 2120

Leader Clipperlon 2120

Modified PTFE(bi-axial) sheet, Off-white in color and produced with Modified PTFE and barium sulfate filler. Suitable for use with hydrofluoric acid and a wide variety of different media across the whole pH-range - string alkalis...

Leader Clipperlon 2130

Leader Clipperlon 2130

Homogeneous expanded PTFE sheet, which uses product geometry rather than fillers or binders to address concerns associated with traditional PTFE material...

Leader ElastaGraph

Leader ElastaGraph

Elastagraph™ standard pipe gaskets - produced by infusing seamless layers of flexible graphite at varying densities and thicknessess over a corrugated metallic core. Designed to solve fugitive emission and compliance problems....

Leader ElastaGraph SG Pipe Flange Gaskets

Leader ElastaGraph SG Pipe Flange Gaskets

Elastagraph SG non standerd pipe and equipment gaskets - produced by infusingseamless layers of flexible graphite at varying densities and thicknessess over a corrugated metallic core. Designed to solve fugitive emission and comp...

LeaderKAM Kammprofile Gasket Style KB

LeaderKAM Kammprofile Gasket Style KB

Convex grooved core without outer guide ring. Consist of a metallic convex grooved core with layers(graphite, PTFE, phlogopite (mica) or alternative). ...

LeaderKAM Kammprofile Gasket Style KB9

LeaderKAM Kammprofile Gasket Style KB9

Convex grooved core with fixed outer guide ring. Consist of a metallic convex grooved core, fixed outer guide ring and with layers(graphite, PTFE, phlogopite (mica) or alternative)....

LeaderKAM Kammprofile Gasket Style KV

LeaderKAM Kammprofile Gasket Style KV

Parallel grooved core without outer guide ring. Consist of a metallic parallel grooved core with layers(graphite, PTFE, phlogopite (mica) or alternative)....

LeaderKAM Kammprofile Gasket Style KV9

LeaderKAM Kammprofile Gasket Style KV9

Parallel grooved core with fixed outer guide ring. Consist of a metallic parallel grooved core, fixed outer guide ring and with layers(graphite, PTFE, phlogopite (mica) or alternative)....

LeaderKAM Kammprofile Gasket Style KV9L

LeaderKAM Kammprofile Gasket Style KV9L

Parallel grooved core with fixed outer guide ring. Consist of a metallic parallel grooved core, fixed outer guide ring and with layers(graphite, PTFE, phlogopite (mica) or alternative)....

Leader Spiral Wound Gasket Type SRI

Leader Spiral Wound Gasket Type SRI

The sealing element with inner- and outer guide ring. The “SRI” SWG’s are manufactured with an inner, outer guide ring, sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

Leader Spiral Wound Gasket Type SI

Leader Spiral Wound Gasket Type SI

The sealing element with inner ring. The “SI” SWG’s are manufactured with an inner ring, sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

Leader Spiral Wound Gasket Type SR

Leader Spiral Wound Gasket Type SR

The sealing element with outer guide ring. The “SR” SWG’s are manufactured with an outer guide ring, sealing element – winding material(SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

Leader Spiral Wound Gasket Type S

Leader Spiral Wound Gasket Type S

The sealing element - no inner- and outer guide ring. The “S” SWG´s are manufactured in sealing element - winding material (SS316L, SS321…) and the soft fillers - graphite, PTFE, MICA....

  • Logo LinkedIn
X

Hi,
You are visiting the EU website but you are from the US.

Would you like to go to the US version?

US Version